Prefabricated house elements must be unloaded at the construction site and assembled at their destination.As the elements also have different center of gravity positions due to their different designs, slinging them often involves a great deal of effort.Components have to be lifted and set down again in order to set the chain shorteners correctly.At the latest when the prefabricated house element is installed, it becomes clear whether the chain shorteners have been attached correctly.Holes and pins must be joined with millimeter precision.If the component hangs askew, often only the use of assembly irons and a lot of muscle power will help.In the worst case, the component has to be put back on the truck and reattached.
With the help of a load tilting device, the prefabricated house element can be lifted from the truck without a great deal of preparatory work and aligned freely suspended on the crane. This saves time and work processes at lofty heights. The inclination can be readjusted at the installation site and even changed during the insertion of tenons into the hole. Until everything fits. This makes work faster, safer and easier. The load tilter makes the entire installation process significantly faster, as the loads do not have to be set down repeatedly and chain shorteners do not have to be readjusted. The load tilt device also makes the installation process safer, as depending on the boundary conditions, an elevated standing position may be required for rehanging the chain shorteners and there is therefore a potential risk of falling. It makes work easier, as less force is required for installation due to the simpler and more precise alignment.
No, the load tilter can be used wherever loads with an eccentric center of gravity need to be brought into an aligned mounting position.
The load tilter is of interest to construction and assembly companies as well as manufacturers of prefabricated building elements. The load tilting device can also be adapted to complete residential modules and containers. Away from construction sites, the load tilting device is interesting for the target groups of vehicle construction, mechanical engineering, assembly and maintenance work
No, the load tilting device is a load lifting device manufactured by Carl Stahl in accordance with DIN EN 13155.
The load tilting device from Carl Stahl is available in the load capacities 500 kg (1,102.31 lbs), 1,500 kg (3,306.93 lbs), 3,000 kg (6,613.87 lbs), and 6,000 kg (13,227.73 lbs).
